Power supply: 12～30V DC; There is reverse polarity protection in controller (the controller voltage ≥17.75 V DC for HART protocol communication)
Output signal : 4~20 mA DC HART( positive action – increase level, interface or density to increase output; or reverse action – increase level, interface or density to reduce output)
Measurement Range: 300mm～2500mm (Out of range is acceptable)
Nominal pressure: ≤42.0MPa(Class2500)
Nominal diameter: DN40 or on request
Ambient temperature: －40℃～+80℃ (When the temperature is ≤-20℃, there is no LCD and the remote transmission can be used normally)
Medium temperature: －196℃≤T≤+450℃
Accuracy: ±0.5%
Effect of power supply: when the power supply changes between the minimum and maximum of specified voltage, the output changes <±0.2% full scale
LCD display: output current signal, process variable, process temperature, percentage range, torque tube rotation angle
Medium liquid density: 0.2≤ρ≤1.9g/cm3
Medium density difference: ≥0.04g/cm3
Torque tube material: Inconel 600 is standard, Monel and HasetlloyC-276 is optional
Chamber material: carbon steel, 304,316 or on request
Displacer material: 304,316L or on request
Flange standard: HG/T20592-2009、HG/T20615-2009 or on request
Power inlet: 2 nos M20×1.5 (Female thread) or on request
Explosion-proof type:
IECEx Ex ia ⅡC T5 Ga；Ex d ⅡC T5/T6 Gb；
TUV Ex ia ⅡC T5 Ga；Ex d ⅡC T5/T6 Gb；
PCEC Ex ia ⅡC T5 Ga；Ex d ⅡC T5/T6 Gb；
Functional Safety Level: SIL2
IP Rating: IP66
Alarm selection: Self-diagnosis of faults where process variable measurement is inaccurate (such as faults of electronic modules). Process variable high and low alarm can be configured
